Author Topic: Paraflu Engine Coolant  (Read 147 times)

0 Members and 1 Guest are viewing this topic.

djhongkong

  • Newbie
  • *
  • Posts: 4
Paraflu Engine Coolant
« on: March 18, 2023, 09:46:26 AM »
Hi everyone,

Iíd appreciate some pointers for an Alfa Guilietta 2013 model. The manual says the engine coolant must be Paraflu which isnít readily available in Victoria.

Iím just wondering if other standard engine coolants would do the job (ie OAT type etc.) or I should specifically source Paraflu. Also is mixing two types advisable or not. It already has engine coolant in the reservoir but below minimum.

Would appreciate any pointers.

Cheers, David

Craig_m67

  • Hero Member
  • *****
  • Posts: 1221
Re: Paraflu Engine Coolant
« Reply #1 on: March 18, 2023, 12:53:03 PM »
Iíve (weíve) used a red (Nulon?) coolant (50:50) mix from SuperCheap whenever it needed topping up (never), or whenever preventative maintenance required (cambelt/water pump/thermostat).

Pretty sure itís red, itís not blue or green that said, Iím colour blind and once bought a black 156 Sportwagon in the dark that turned out to be charcoal grey (and much nicer).

Paraflu is just a brand, itís the specifications that matter.  Tech spec says Red

Red protective with antifreeze action, based on inhibited monoethylene glycol with organic formula.  Exceeding CUNA NC 956-16, ASTM D 3306 specifications.
'66 Duetto (lacework of doom)
'73 1600 GT Junior (ensconced)
'03 156 1.9JTD Sportwagon (daily driver)


djhongkong

  • Newbie
  • *
  • Posts: 4
Re: Paraflu Engine Coolant
« Reply #3 on: March 18, 2023, 09:33:25 PM »
Thanks all