156 2.0 Twin Spark rear main seal

Started by Henry156, July 19, 2021, 09:40:41 PM

Previous topic - Next topic

Henry156

Hi. I'm replacing the clutch and concentric slave cylinder on my 156 2.0 Twin Spark manual and as it's done 240,000 km was wondering if I should replace the rear main seal while it's in pieces? (And wow is it in pieces). I've removed the flywheel and can see a very slight seeping which I would definitely not call a leak. Is replacing the rear main a relatively straight forward job? I can only see 5 bolts into the block and 2 up through the sump but not sure if it would seal again without removing or at least dropping the sump a few millimeters. Or do I just leave it alone.? Any help or guidance would be very much appreciated.

bazzbazz

On The Spot Alfa
Mobile Alfa Romeo Diagnostic/Repair/Maintenance/Service
Brisbane/Gold Coast
0405721613
onthespotalfa@iinet.net.au

Henry156

Thanks Bazzbazz. Any tips on putting the new rear main seal in? Do I have to drop the sump first? Cheers.