Author Topic: 105 jack point for quick jack  (Read 1754 times)

0 Members and 1 Guest are viewing this topic.

Campbeli

  • Full Member
  • ***
  • Posts: 144
  • Neil Campbell
  • AROCA Member #: 8551
105 jack point for quick jack
« on: April 12, 2021, 07:31:54 PM »
I've bought a quick jack for the workshop. https://www.quickjack.com.au/
Goes great for the 147 with pinch seam rubber blocks, and now i'd like to lift the 105 GT junior.
I'm concerned lifting under the factory jack points (for the battini) will crush the square channel.
Any suggestions on what good lift points would be using a quickjack?



Present:
1970 GT Junior
2004 147 T Spark

Past:
1979 Alfetta GT
1978 Alfasud ti
1999 156 T spark

Future:
New Giulia.......

vin sharp

  • Full Member
  • ***
  • Posts: 218
Re: 105 jack point for quick jack
« Reply #1 on: April 16, 2021, 05:45:53 PM »
You won't have any issue with using the square tube jacking points, so long as the floor they are attached to is sound.
I lift using the factory points all the time, never even looked like an issue. The material is quite robust.

Campbeli

  • Full Member
  • ***
  • Posts: 144
  • Neil Campbell
  • AROCA Member #: 8551
Re: 105 jack point for quick jack
« Reply #2 on: April 22, 2021, 05:58:50 PM »
Thanks Vin, i'll give it a try.....carefully
Present:
1970 GT Junior
2004 147 T Spark

Past:
1979 Alfetta GT
1978 Alfasud ti
1999 156 T spark

Future:
New Giulia.......