159 2.2 JTS not starting first time.

[Colin Edwards]

Given the mist from a direct injection engine like the JTS does not condense on cold surfaces like the inlet tract and inlet valve, its fair to assume the mixture during a cold start will be leaner than that of a port injection engine.  Happy to be corrected! 
The mixture in the combustion chamber at the moment of an ignition event could be leaner or of the incorrect shape if the injectors are iffy.

Could it be possible the ECU does not know the engine needs a slightly richer micture due to the coolant temperature?  Is the temperature sensor iffy?  Does the JTS use a temperature sensor specific to "cold" starting?

A new set of injectors could be pricey!

[Alfatango]

I chucked in the Nulon Pro Strength Petrol System Clean a couple of weeks ago and it didn't anything at first. It could be a coincidence but I put the Nulon Extreme Stress Engine Oil in recently and it seems to have solved the cold start issue or at least helped with it. It could have been because its hot as well but it started a few times first time after the car was sitting for a couple of days which it usually didn't before.

https://www.sparesbox.com.au/part/nulon-pro-strength-petrol-system-extreme-clean-500ml-pec?gclid=EAIaIQobChMIsZPwktD-7gIVhNeWCh1l5wbGEAQYBCABEgLb5vD_BwE

https://www.sparesbox.com.au/part/nulon-pro-strength-extreme-performance-engine-treatment-500ml-xpet?gclid=EAIaIQobChMIzpbC6tD-7gIVk7mWCh0KKgxDEAQYAyABEgKZhfD_BwE

[Alfatango]

Update, since the Nulon additions as above, the car is starting first time and it could be a placebo but the engine sounds angrier and seems to drive with a bit less effort. And by angrier I mean if you watch Street Outlaws and they do a great pass, you can hear the engine being in the zone.