Firewall holes. what goes where?

Started by schu, March 22, 2020, 09:36:55 AM

Previous topic - Next topic

schu

Hi all,
I am new to the group and have just embarked on restoring a 73 GTV. It was in reasonable nick with an original 86000 on the clock. It needed a new paint job and I wanted to see if there was any rust in it, so it was pulled apart a few years ago and its now time to put it back together. The problem is I don't know which cables etc go through which hole in the firewall (the painter removed most of that stuff). Also, could someone please explain what the big holes are up in the wiper area and what is supposed to go in the holes. I haven't worked out how to attach a picture to the topic to help make things easy for explaining so I have it as my profile picture if that helps.
Thanks all

bonno

Hi Schu
Welcome aboard and find attached link on sticky notes link on "how to" upload images to the forum. A max of 4 photos per post which need to be reduced in size to allow uploading. Forum members that own the same model Alfa should be able to help or you could also have a look at some examples (images) via the net.

http://www.alfaclubvic.org.au/forum/index.php?topic=55.0
Regards
bonno

bonno

The following site, together with the parts schematic should be able to assist in identifying individual apertures through the firewall for your specific model GTV 105 series.
https://victorparts.com/en/parts/alfa-romeo-giulia-gt-bertone/body-parts/rubber-parts/body-seals.html
or
Alfa Romeo spares for their range of spares for your model and series Alfa.
https://www.alfaromeospares.net/