unclipping a spider fuel injector electric connection

Started by cc, March 16, 2019, 07:37:13 PM

Previous topic - Next topic

cc

Usually with these connectors the little U shaped wire clip can be pushed in on one side, spreading the wire clip on the arms of the U shape. Not the case with this one. Any ideas.

bazzbazz

You just get a fine tool and pry the bottom feet of the U clip aside.
On The Spot Alfa
Mobile Alfa Romeo Diagnostic/Repair/Maintenance/Service
Brisbane/Gold Coast
0405721613
onthespotalfa@iinet.net.au

cc


Citroƫnbender


cc

No : )
The individual wires from each injector are wrapped together and then join with other wrapped bundles of wires and disappear into the firewall.
The wire clips came out easily using some little toledo picking tools from Repco.
Have taken the air con off and its condensor. Still nutting out a safe elegant way to drop the engine using the engine mounting points. Keeping the inlet and exhaust manifolds still attached..