Author Topic: Project 164 - lets see how this goes  (Read 12891 times)

0 Members and 1 Guest are viewing this topic.

CitroŽnbender

  • Hero Member
  • *****
  • Posts: 1454
  • Gen. 3:19
Re: Project 164 - lets see how this goes
« Reply #75 on: May 05, 2018, 06:35:15 PM »
If in doubt, identify the pump by its manufacturing details on the top, look them up online (matching replacement parts) to see the ends of the tubes where the fittings go.

shane wescott

  • Hero Member
  • *****
  • Posts: 577
    • AussieMentor.com
Re: Project 164 - lets see how this goes
« Reply #76 on: May 06, 2018, 04:44:34 PM »
Thanks Mate.

Good advice.
Current Cars:

1991 White 164

Previous Cars:
86 White GTV6 Zender Body Kit
90 Red 75 TS
98 Blue GTV 2.0
85 Red 33 1.5 TI
85 Red 33 1.7 Carby
83 Silver 33 1.5 GCL
70 Blue Berlina 1750
70 White Berlina 1750

70 White Berlina 1750 (my first)

Current Bikes:

2002 Yellow Ducati ST2 944

shane wescott

  • Hero Member
  • *****
  • Posts: 577
    • AussieMentor.com
Re: Project 164 - lets see how this goes
« Reply #77 on: May 27, 2018, 03:30:11 PM »
Next question. The "gaskets" on the power steering hose connections.

Anyone have any idea on where I might get some new ones of these. They are shown in this picture and parts list as gasket 10261360, 60800578, and 10261150.

Not sure If I am being paranoid, and they are just washers but I dont want to put it back in and have it leak :-(.

Any ideas Brains Trust.

Thanks in advance

Shane
Current Cars:

1991 White 164

Previous Cars:
86 White GTV6 Zender Body Kit
90 Red 75 TS
98 Blue GTV 2.0
85 Red 33 1.5 TI
85 Red 33 1.7 Carby
83 Silver 33 1.5 GCL
70 Blue Berlina 1750
70 White Berlina 1750

70 White Berlina 1750 (my first)

Current Bikes:

2002 Yellow Ducati ST2 944

bonno

  • Hero Member
  • *****
  • Posts: 800
  • AROCA Member #: 8683
Re: Project 164 - lets see how this goes
« Reply #78 on: May 27, 2018, 04:13:16 PM »
Hi Shane
These are Off the shelf copper washers. Find attached link for supplier of one of the P/N 10361360
https://www.messicks.com/part/10261360/washer-copper
now
83 Alfetta GTV
05 156 JTS manual
past
00 156 selespeed
72 1750 GTV

CitroŽnbender

  • Hero Member
  • *****
  • Posts: 1454
  • Gen. 3:19
Re: Project 164 - lets see how this goes
« Reply #79 on: May 27, 2018, 04:56:41 PM »
Can also try Pirtek/Enzed etc, or if the originals are more or less OK just anneal them and re-use.

shane wescott

  • Hero Member
  • *****
  • Posts: 577
    • AussieMentor.com
Re: Project 164 - lets see how this goes
« Reply #80 on: November 30, 2019, 08:58:57 AM »
For all those watching this thread, the Project 164 needs to go.

I posted in the Buy/Sell/Swap section.

Ping me if you are interested.

Regards

Shane
Current Cars:

1991 White 164

Previous Cars:
86 White GTV6 Zender Body Kit
90 Red 75 TS
98 Blue GTV 2.0
85 Red 33 1.5 TI
85 Red 33 1.7 Carby
83 Silver 33 1.5 GCL
70 Blue Berlina 1750
70 White Berlina 1750

70 White Berlina 1750 (my first)

Current Bikes:

2002 Yellow Ducati ST2 944