Alfa 33 Engine/Gearbox removal

Started by shane wescott, June 14, 2006, 11:35:35 PM

Previous topic - Next topic

shane wescott

new clutch in (eventually must buy a pilot shaft to make it easier)

engine and gearbox finally back in the car, steam cleaner dod a good job on the engine and the biggest pain in the but today ..........

A stuck tie rod end, not stuck in the arm, rusty threads inside the rod.  always, always always lubricate those suckers before installing them. this one looked original and took me a full 45 minutes to unscrew (no gym workout needed for a week)

Tomorrows job is to do most of the connection work, and hopefully in a couple of weeks my new baby will be on the road.
Current Cars:

No Alfa's :-(

Previous Cars:
1991 White 164
86 White GTV6 Zender Body Kit
90 Red 75 TS
98 Blue GTV 2.0
85 Red 33 1.5 TI
85 Red 33 1.7 Carby
83 Silver 33 1.5 GCL
70 Blue Berlina 1750
70 White Berlina 1750

70 White Berlina 1750 (my first)

Current Bikes:

2002 Yellow Ducati ST2 944

shane wescott

Engine and gearbox back in.  :)

Unfortufortunatly didnt check the alignment of the main top engine mount, so the engine is skewed to the left. Only noticed when I started the engine and the exhaust pipe was knocking. :(

Next job is to jack the engine, loosen front mounting bolts, rearrange the washer etc to centre the engine in the top mount and job should be a gooden.

Best tip for starting an engine which has been dry of petrol for a couple of months - a can of START YA BASTARD  :) Great product from Nulon. Only in Aus could you make a product with such a name, but it works like a charm. A couple of squirts, a couple of false starts and then she revved into life.

Catch ya

Shane
Current Cars:

No Alfa's :-(

Previous Cars:
1991 White 164
86 White GTV6 Zender Body Kit
90 Red 75 TS
98 Blue GTV 2.0
85 Red 33 1.5 TI
85 Red 33 1.7 Carby
83 Silver 33 1.5 GCL
70 Blue Berlina 1750
70 White Berlina 1750

70 White Berlina 1750 (my first)

Current Bikes:

2002 Yellow Ducati ST2 944

Evan Bottcher



Bwahaha - never heard of it before.  ;D
Newest to oldest:
'13 Alfa Mito QV
'77 Alfasud Ti
'74 Alfasud Sedan
'68 1750 GTV
--> Slow and Fun - my Alfa journal

shane wescott

I took a can (empty) to the UK for my Boss. The Poms couldn't believe a product could be sold like that.

It is excellent stuff Mate, engines, mowers, whipper snippers. If they dont start with Start Ya Bastard, they ain't gunna start.

Catch ya

Shane
Current Cars:

No Alfa's :-(

Previous Cars:
1991 White 164
86 White GTV6 Zender Body Kit
90 Red 75 TS
98 Blue GTV 2.0
85 Red 33 1.5 TI
85 Red 33 1.7 Carby
83 Silver 33 1.5 GCL
70 Blue Berlina 1750
70 White Berlina 1750

70 White Berlina 1750 (my first)

Current Bikes:

2002 Yellow Ducati ST2 944

shane wescott

finally found some time to work on the crooked engine mount. droped the engine down pulled the mount out and centred it.

Engine now runs with no loud exhaust knocky sounds :-)

Next job is to finish wiring connections and some piping then roadworthy.

Catch ya

Shane
Current Cars:

No Alfa's :-(

Previous Cars:
1991 White 164
86 White GTV6 Zender Body Kit
90 Red 75 TS
98 Blue GTV 2.0
85 Red 33 1.5 TI
85 Red 33 1.7 Carby
83 Silver 33 1.5 GCL
70 Blue Berlina 1750
70 White Berlina 1750

70 White Berlina 1750 (my first)

Current Bikes:

2002 Yellow Ducati ST2 944

Scott Farquharson

You know I love the 900 series....
Scott Farquharson
Group A Dulux Alfetta GTV6
Group S Alfetta GTV
Alfetta GT (GTAM?)

rain902

Quote from: Scott Farquharson on October 27, 2006, 05:19:05 PM
You know I love the 900 series....

love it so much that i hear that you are going to build a full on sud Scott  ;D ;D ;D