Selespeed oil level

Started by jimay3677, August 11, 2014, 08:12:33 PM

Previous topic - Next topic

jimay3677

Ok so I went out to do the weekly engine oil top up and selespeed oil check. I opened the drivers door and checked the level and it was bang on min.  I walked back to the shed to grab some fluid pulled the selespeed cap off and it was dead on max. Opened driver door again and still on max after three checks, what the??

Sent from my GT-I9305 using Tapatalk

jimay3677

Duh I had no idea there were different measurements on the dipstick

Sent from my GT-I9305 using Tapatalk


Alfa156Melb1

Been in Rutherglen for a couple of weeks now.. still haven't seen you around!!! You mustn't be driving her enough!!  8)

jimay3677

Yeah I work in wang. I'm often at iga just after 4:30

Sent from my GT-I9305 using Tapatalk


Kulwinder

Check dipstick both sides. One side has min/max levels when cold. Other side has min/max levels when at 90degrees (hot). Don't be confused


Kulwinder Singh