Text only | Text with Images

Alfa Romeo Owners Club of Australia Forum

General Category => Photos & Videos => Topic started by: Colin Byrne on October 09, 2006, 01:06:35 PM

Title: Bit's for the targa car
Post by: Colin Byrne on October 09, 2006, 01:06:35 PM
Still haven't got my car back from the Panel beater so have been getting everything ready to bolt back on, here's a photo of the steering box and idler, and the set of 45's
Title: Re: Bit's for the targa car
Post by: Evan Bottcher on October 09, 2006, 01:39:13 PM
Gorgeous Colin,

Did you paint the idler box or just blast it and leave it raw?  What paints did you use?

thanks,
Evan.
Title: Re: Bit's for the targa car
Post by: Evan Bottcher on October 09, 2006, 01:44:56 PM
Just for the record I wasn't addressing you as "Gorgeous Colin" I was saying that the steering box and carbs were gorgeous  :D
Title: Re: Bit's for the targa car
Post by: Colin Byrne on October 09, 2006, 02:13:41 PM
Yea i got worried there for a second! Sand blasted, then painted with VHT universal aluminium, comes up real nice but also you can wipe of dirt and grease where as soon as you touch sandblasted alli it stains.
Text only | Text with Images