Print Page - Giulietta front wheel bearing

Title: Giulietta front wheel bearing
Post by: pafiat on September 09, 2019, 01:01:18 PM

Hi, whats involved in replacing a front wheel bearings on a Giulietta. Who is a good source of bearings?

Title: Re: Giulietta front wheel bearing
Post by: pafiat on September 10, 2019, 03:35:18 PM

compliance plate says 2/83. it has plastic bumpers, 1800 engine.
rgds pat

Title: Re: Giulietta front wheel bearing
Post by: bonno on September 10, 2019, 07:16:02 PM

Hi Pat
Find attached extract from an Alfetta manual which should help. With regards to new bearings suppliers, try local club sponsor or bearing suppliers in your area. Bearing manufacturer and its corresponding bearing number is stamped on the bearing shell.

Title: Re: Giulietta front wheel bearing
Post by: pafiat on September 11, 2019, 04:30:29 PM

thanks for the info. Quite old school! I'm used to Fiat X1/9's with dual row balls and fancy retainers. This is just like my trailer. Not a bad thing!

Alfa Romeo Owners Club of Australia Forum

Technical => 116 Series (Alfetta Sedan/GT/GTV & Giulietta Sedan) => Topic started by: pafiat on September 09, 2019, 01:01:18 PM