Print Page - Sud Ti QV Speedo cables set up

Title: Sud Ti QV Speedo cables set up
Post by: Bourney on July 29, 2019, 12:16:46 PM

Hi,

I have 1 speedo cable but have bought a 2nd hand 2 speedo cable set up to bring my engine bay appearance to original (apologies, I have ocd tendencies)!

I have read the 2 cable set up is not as good as a single cable and connection to the gearbox is fiddly so I may just install but not hook up.

I gather the 1st speedo cable (longer one) goes from the speedo to the junction. My question is where the 2nd cable (shorter one) goes from the junction? Does it go around the large ventilation box and then down the hole on the driver side's of the large ventilation box? Does not look long enough to go around the battery and back to the driver's side of the ventilation box??

Any description and/or pics would be really appreciated.

Thanks David

Sent from my iPhone using Tapatalk

Title: Re: Sud Ti QV Speedo cables set up
Post by: amichie on July 30, 2019, 10:34:19 AM

I can take a pic of mine on the weekend. I have the two cable set up.

Title: Re: Sud Ti QV Speedo cables set up
Post by: Bourney on July 30, 2019, 04:45:45 PM

Thanks, that would be great! [emoji106]

Sent from my iPhone using Tapatalk

Title: Re: Sud Ti QV Speedo cables set up
Post by: amichie on August 29, 2019, 07:19:45 AM

Pics of my Speedo cable.

Title: Re: Sud Ti QV Speedo cables set up
Post by: amichie on October 30, 2019, 04:19:08 PM

The cable on the driver's side goes down to the gearbox. The Passenger side one loops back into the dash.

Title: Re: Sud Ti QV Speedo cables set up
Post by: Bourney on October 30, 2019, 06:53:03 PM

Thank you!

Alfa Romeo Owners Club of Australia Forum

Technical => 900 Series (Alfasud, Alfasud Sprint, 33) => Topic started by: Bourney on July 29, 2019, 12:16:46 PM