Alfa Romeo Owners Club of Australia Forum proudly hosted by AROCA Victorian Division
January 10, 2009, 11:07:25 AM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Please edit your forum profile to set your AROCA State Division.  See this post for more information.
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: Front end rebuild  (Read 1349 times)
sportscar
Newbie
*
AROCA Division: Victoria
Posts: 41


View Profile
« on: September 14, 2007, 09:09:07 PM »

Hi all , recently i installed some Koni shockers to my Alfa 1750.
Now i'm looking at doing up the whole front end.It looks like it's never been touched.
Had a few problems recently getting parts for it.
Any idea who stocks front end parts for a series 1 ,105 coupe
Logged
Simon Bidese
Jr. Member
**
Posts: 78


View Profile
« Reply #1 on: September 14, 2007, 09:18:18 PM »

Hi Sportscar, try the sponsors page from the website, Alfa Repairs / Monza Motors (Bayswater) should have what you require.

Simon
Logged
sportscar
Newbie
*
AROCA Division: Victoria
Posts: 41


View Profile
« Reply #2 on: September 16, 2007, 08:38:30 AM »

hi thanks i know the guys at monza motors ,they're very friendly
I was planning on doing the work myself ,just want to know if anyone has done there front end in one of these cars recently,there seems to be alot of play in the steering too.
Logged
Colin Byrne
Full Member
***
AROCA Division: Victoria
Posts: 175



View Profile WWW
« Reply #3 on: September 17, 2007, 07:57:07 AM »

Turin Imports is another good one for new parts like that, and they give a discount if you’re a club member.  Parts that may require replacing are the 6 steering tie rod ends ($50 each), be sure to order the correct one as there are two with left hand and two with right hand threads.  The lower control arm ball joint ($100 each) and the top camber arm (not sure how much) and if you are going to replace the camber arm you can always make it adjustable (vin sharp as these).  The top caster arm ball joints are hard to find but you can get new inserts for the caster arm bush (something I need to get for my car). 
The steering tie rods are easy to replace if you have a suitable ball joint remover.  The hard parts is re-aligning the steering as to do it properly to get the correct Ackerman values requires you to string line the car, and follow the lengthy procedure in the manual, and you can guarantee if you take it to a wheel alignment shop they wont do it properly.
Changing the top camber arm is reasonable easy, jack the car up, take the wheel off and then lower the bottom control arm onto a jack stand, which should raise the top arm of the droop stop, then you can undo the inboard bolt from the engine bay and remove the ball joint.  Not sure if you can do the bottom ball joint in the same manner as you may need to remove the spring, which to do safely requires the special tool.
If there’s play in the steering it’s almost defiantly coming from the steering box, first thing to do is ensure all the bolts that hold the top cover of the steering box are tight, they do come loose, if you’ve done that and there’s still some slack try removing the two bolts of the little top cover, under that there should be a stack of shims, try removing one and put it back together and check it.

Good luck!
« Last Edit: September 21, 2007, 09:52:07 PM by Colin Byrne » Logged

72' 105 2000 GTV Red (tarmac rally/race car)
74' 105 2000 GTV Blue (road car)
89’ Skyline station wagon (Tow car/Alfa support vehicle)
82’ Skyline station wagon (Spare Parts Car)
Sheldon Mcintosh
Alfa2010
Sr. Member
*
AROCA Division: Victoria
Posts: 427



View Profile
« Reply #4 on: September 17, 2007, 05:06:11 PM »

Hey Colin, can you build a 90 for your next Targa car please?
Logged

90 -  Grey one.  (Ironsides).  For track use only
90 - Blue one.  For road use only
GTV6 - Blue.
Colin Byrne
Full Member
***
AROCA Division: Victoria
Posts: 175



View Profile WWW
« Reply #5 on: September 19, 2007, 07:30:13 AM »

Having an extra couple of cylinders to play with is tempting, maybe a 105 / 90 hybrid?, maybe then I wouldn’t have to struggle so much to get around you on the straight!
Logged

72' 105 2000 GTV Red (tarmac rally/race car)
74' 105 2000 GTV Blue (road car)
89’ Skyline station wagon (Tow car/Alfa support vehicle)
82’ Skyline station wagon (Spare Parts Car)
Sheldon Mcintosh
Alfa2010
Sr. Member
*
AROCA Division: Victoria
Posts: 427



View Profile
« Reply #6 on: September 19, 2007, 04:50:04 PM »

Yeah I was surprised how long it took for you to get past, I was expecting you to tuck in behind for a tow!

That baby's got more Back than J Lo,Shakira and Beyonce in a threesome.  Even Scott managed to draft me down the straight in his 12hp Blue Thunder.
Logged

90 -  Grey one.  (Ironsides).  For track use only
90 - Blue one.  For road use only
GTV6 - Blue.
Scott Farquharson
Hero Member
*****
AROCA Division: Victoria
Posts: 890



View Profile
« Reply #7 on: September 19, 2007, 05:26:18 PM »

Yeah baby, that thing punches a big hole in the air
Logged

Scott Farquharson
www.malvern-group.com.au/dulux
Group C/A Dulux GTV6
Group S Alfetta GTV 2.0L (new project)
156 Selespeed
75 Twinspark
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.4 | SMF © 2006-2007, Simple Machines LLC
Joomla Bridge by JoomlaHacks.com
Valid XHTML 1.0! Valid CSS!
Page created in 0.072 seconds with 21 queries.