Local supplier of 105 panels required.

alfagtv100

Newbie

AROCA Division: Victoria
Posts: 41

Local supplier of 105 panels required.

« on: August 02, 2008, 02:59:59 PM »

Hi all,

Could someone please help with recommendations for local panel suppliers?
Burwood Panelworks are ready to start the repairs to my 105 but are struggling with a lack of response from the supplier they are trying to source parts from. I wont mention who, as they are a club sponsor.
I have provided details for the usual UK sources but need a reliable local option, providing quality replacement panels.
Thanks in advance for any help you can provide.

Cheers,

Marco.


	Logged

Marco Leoncelli
1971 1750 GT Coupe Series II
2008 159 Ti V6 3.2

John A Pucak

Newbie

AROCA Division: New South Wales
Posts: 33

Re: Local supplier of 105 panels required.

« Reply #1 on: August 02, 2008, 05:25:23 PM »

Have you tried Rob at Manning Motors his number is 02 99392069
Good Luck


	Logged

Davidm1750

Full Member

AROCA Division: Not a Member (Yet!)
Posts: 112

Re: Local supplier of 105 panels required.

« Reply #2 on: August 04, 2008, 01:28:08 PM »

Hi Marco

Which panels are you after? I assume you are referring to the rear ones (LHS guard, rear valance and bootlid as a result of the shunt you had, if I recall correctly ?? The only local people I am aware of are as I recall both club sponsors, and both located in Melbourne. I was similarly thinking of checking them out for a boot lid and doors as mine are all rusty and probably beyond repair.

If you are not having any luck with these I seriously would consider using the UK as your best option. These obviously include Classic Alfa, Alfaholics, Highwood and EB spares. From my experience so far, having made a comparison with many of the parts I need for my Super and GTV, I have found Classic Alfa (Richard Norris) to be slightly cheaper than the other suppliers. Parts from the UK seem only to take about 1 week to arrive. Good luck with the hunt for parts. Cheers Dave


	Logged

Current:
2003 JTS 156 sportwagon
1969 1750 GTV (My toy now, for hillclimbs, rallys etc once restored)
1969 Giulia Super (part restored)
1969 AC Fiat 124 sport (Fully restored, owned for 28 yrs !!)

Past: '76 Alfetta 1.8 GT
'76 Alfetta 1.8 Sedan
' 73 2L Berlina

alfagtv100

Newbie

AROCA Division: Victoria
Posts: 41

Re: Local supplier of 105 panels required.

« Reply #3 on: August 04, 2008, 04:10:46 PM »

Thanks John and David,
The supplier contacted Burwood Panelworks this morning. The order has been placed, so things seem back on track.
Cheers,
Marco.


	Logged

Marco Leoncelli
1971 1750 GT Coupe Series II
2008 159 Ti V6 3.2

Tim jobson

Newbie

AROCA Division: Western Australia
Posts: 40

Re: Local supplier of 105 panels required.

« Reply #4 on: October 13, 2008, 09:50:17 PM »

Hi Guys,

I am after panels too, can you let us know Burwood Panelworks number or email

Thanks Tim


	Logged

1976 105 GTV 2000
Past
79 Fiat Spider 2000
76 Ferrari 308GTB Dry sump fiberglass model
74 Fiat 124 Sport CC, 128SL,850 Sport

Brad Marshall

Alfa2010
Full Member

AROCA Division: Victoria
Posts: 150

...the Mongrel lifts a leg.

Re: Local supplier of 105 panels required.

« Reply #5 on: October 13, 2008, 11:25:37 PM »

Tim,
Burwood panels were just piecing together Marco's 105 (in a very fine fashion), there don't have 105 panels hanging about. Marco's post was just saying Burwood panels were contacting a third party to source the required panels and there was a little delay. Correct me if I'm wrong Marco.
Check our sponsors page, some of those chaps may be able to assist you.
Brad


	Logged

Now
86 Alfasud Sprint 1.5 - red
72 105 GTV 2.0 - red

Pages: [1]

« previous next »