Alfa Romeo Owners Club of Australia Forum proudly hosted by AROCA Victorian Division
December 03, 2008, 07:23:49 PM *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Please edit your forum profile to set your AROCA State Division.  See this post for more information.
 
   Home   Help Search Login Register  
Alfa Romeo Owners Club of Australia Forum > General Category > Buy/Swap/Sell > Door Hinges for 75 (NSF)
Pages: [1]
« previous next »
  Print  
Author Topic: Door Hinges for 75 (NSF)  (Read 486 times)
Matthew Coote
Jr. Member
**
AROCA Division: New South Wales
Posts: 70



View Profile
« on: July 19, 2008, 04:56:09 PM »
Was wanting to buy a set of hinges for a 75 as the pin seems to have worn quite badly on the passenger's door.

Interestingly enough the drivers door is fine .... go figure.

I would prefer red (which red shouldn't really matter as its in the door cavity) but would take any colour if the price was right.

Even if condition is not mickey mouse i would be interested as i could re-pin them just need something to hold the door on while it gets done so i don't look like Jeremy Clarkson in his Rover SD1.

Let me know if anybody has wrecked a 75 and is lookin to off load parts.

Cheers

Matt
Logged
Rust, nah that's not rust .... its iron oxide!!!
John A Pucak
Newbie
*
AROCA Division: New South Wales
Posts: 33



View Profile
« Reply #1 on: July 19, 2008, 08:22:33 PM »
Hi Matt ,Tom Patrizi in Carlton has one of Martins old 75 wrecks sitting out in the laneway. The doors were still attached, you might need to buy some red paint as the car is white
Good Luck
Logged
jimnielsen
Full Member
***
AROCA Division: Victoria
Posts: 118



View Profile
« Reply #2 on: July 20, 2008, 07:59:51 AM »
Are the hinges the same as for an 80's Giulietta?

jimn~
Logged
'95 Alfa Romeo 155 Q4
John A Pucak
Newbie
*
AROCA Division: New South Wales
Posts: 33



View Profile
« Reply #3 on: July 20, 2008, 07:56:53 PM »
Jim, thats a technical question I cannot answer. Maybe someone out there can enlighten all us Alfisti about the diameter of the door hinges on 4 door Alfettas. Now that would make a great Trivia night question!!!!
John
Logged
jimnielsen
Full Member
***
AROCA Division: Victoria
Posts: 118



View Profile
« Reply #4 on: July 20, 2008, 09:12:23 PM »
well, the doors are interchangeable (to my knowledge..) I suspect the hinges are the same - anyway I can get you some hinges from the (many) Giulietta's that happen to be lying around here underfoot.
Logged
'95 Alfa Romeo 155 Q4
Matthew Coote
Jr. Member
**
AROCA Division: New South Wales
Posts: 70



View Profile
« Reply #5 on: July 20, 2008, 10:10:47 PM »
Hi Jimmy

I will post you photos tomorrow .. they are probably interchangable
Logged
Rust, nah that's not rust .... its iron oxide!!!
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.4 | SMF © 2006-2007, Simple Machines LLC
Joomla Bridge by JoomlaHacks.com 		Valid XHTML 1.0! Valid CSS!
Page created in 0.071 seconds with 21 queries.