15 inch rims with 4 x 98pcd

hammer

Full Member

AROCA Division: Queensland
Posts: 106

15 inch rims with 4 x 98pcd

« on: May 05, 2008, 06:36:05 PM »

Does anyone out there (preferably in Qld) have a set of 15 inch rims with a 4 x 98pcd stud pattern that they are willing to part with for something less than a king's ransom? The internal diameter of the rim also needs to be as close to a minimum of 370mm as possible. I know I am pushing the friendship now, but I am going to use them as race rims so the lighter they are the better.

Thanks folks,

Brent


	Logged

acresci

Newbie

AROCA Division: South Australia
Posts: 3

Re: 15 inch rims with 4 x 98pcd

« Reply #1 on: October 16, 2008, 03:15:49 PM »

Hi,

I've just joined the website and noticed your request for some rims. Are you still looking ? If so, I have 4x 15" wire type wheels that were on a 105 (which i think has a 98PCD). I'm in SA.

Adrian


	Logged

Edward Hellsten

Alfa2010
Hero Member

AROCA Division: Western Australia
Posts: 616

Re: 15 inch rims with 4 x 98pcd

« Reply #2 on: October 16, 2008, 03:48:39 PM »

Sorry to dissapoint you but 105 wheels are not 4x98 so wont fit.


	Logged

Now -

80 Alfetta GTV 2000 - red
Then -
76 Sud L 1.3 - white
85 33 1.5 - red
00 156 Selespeed - red
77 Alfetta GTV - Group S project - yellow
86 SudSprint 1.5 - clubsprint car - red
77 Alfetta GTV - Tarmac rally/Group S - red
03 156GTA 3.2 manual - daily driver - black

hammer

Full Member

AROCA Division: Queensland
Posts: 106

Re: 15 inch rims with 4 x 98pcd

« Reply #3 on: October 21, 2008, 07:40:57 PM »

Thanks guys. I ended up grabbing a set from Newcastle.

Cheers,

Brent


	Logged

John A Pucak

Newbie

AROCA Division: New South Wales
Posts: 33

Re: 15 inch rims with 4 x 98pcd

« Reply #4 on: October 21, 2008, 10:58:53 PM »

Hi Hammer, if you need a spare set of 15x6.5 lightweight alloys , I have them sitting in my garage with worn yoko 32rs. I used to use them for supersprints on my Alfetta GT. They are Velox Star pattern alloys, they can clear V6 brakes( woops did I say that) and are the 4x98pcd in perfect condition for $400
Cheers Hollywood


	Logged

hammer

Full Member

AROCA Division: Queensland
Posts: 106

Re: 15 inch rims with 4 x 98pcd

« Reply #5 on: October 30, 2008, 11:35:00 PM »

Hollywood,

Thanks very much for the offer. I am actually using the spacers that Jim Nielsen had made for the Guilietta, that convert the PCD from 4X 98 to 4 x 114.3. So believe it or not I am currently running a set of 15 x 7 wheels that I bought from a young drift racer that he used to run on a Toyota.

Thanks again for the offer and congrats on your efforts at the East Coast Challenge. Hope to see you at Lakeside next year for round three.

Cheers,

Brent


	Logged

Pages: [1]

« previous next »