thanks greengtv8,

Thanks heaps for the tips, Ive never done rears before on an alfetta so should be quite interesting. Hopefully can get a hoist free at my workshop to do it on.

Cheers

Cheers Jim,

Ive got a spare transaxle assembly so I might practice on this first.

I have to replace the rear brake pads on my alfetta on the weekend. I will follow the worshop manual, but I also know there a pain in the @$*?! to do, so I was after any pointers handy hints or things to look out for.

Is it common for these calipers to sieze? I was replacing the flex hose on the rear and noticed that three out of the four pads were about 70% and that one was nearly on the backing plate.

Cheers Meizhak

For sale,

One set of EBC red brake pads to suit steel bumper Alfetta GTV 2.0, brand new in box (with stickers whoohoo!).

Send me a message or give us a call 0423734672 if interested

I have upgraded brakes and no longer require these.

I am asking $80.00 or make me an offer, cant remember what they cost me.

Thanks Vin I will contact you shortly

Meizhak

Cheers mate, thanks for your help, bit hard over here in WA, we dont even have a proper alfa wrecker anymore.

This forum is a good avenue to finding parts and info we need.

Thanks

Cheers Phil,

Do you have a phone number for him?

I have spoken to garry Wrench re getting a fibreglass hatch made up, but he no longer does them.
I guess I'll keep looking for someone to make one for us, or for a good secondhand one, or I could just replace the old bog in mine with some new bog.

If anyone else knows of anyone that can help me out with either a fibreglass rear hatch or a good secondhand one will be greatly appreciated.

Thanks guys,
Managed to track down window runner from milano.

One other question, does anyone if theres someone in aust that does rust repair sections, or will I have to make them up. Ive noticed that highwood alfa do some.
I need the lower part of the front guards behind the front wheels, pretty much the only rust on the vehicle except for the rear hatch, which is looking like it will cop a fibreglass replacement.The rest of the car has been drenched in that rust protector stuff they spray on cars when new.Its a pain in the rear they put it everywhere and I mean everywhere.

Cheers

Hello and welcome Tim,

FYI there was a GTV in todays quokka if you havent seen it already.

Good luck

Thanks Phil,

Do you know where I could obtain a fibreglass rear hatch from

Cheers shack

Hi All,

I am chasing the black strip that sits between two r/h rear side windows. does anyone know if this is just a bolt in job or is it fixed. Mine is rusted and needs replacing.

Im also chasing a good rear hatch and set of extractors to suit 2L


shack

Ed

I think there alfetta sedan rims. I'll post a picture soon. They came of my white GTV 2000.

Meizhak

Ed,

Ive got a set of alloys you can borrow to get you by if you want.There 15 inch with tyres. I dont have any plans to use them in the near future so you can use them until you find some if you like.

Meizhak

For anyones information, managed to source these couplings from centreline alfa in the US. Total price including freight was about $260.00. And yes they did fit.

Cheers

Hi there,
has anyone ever ordered driveshaft donuts from highwood alfa in UK. If so were they correct?
( have steel bumper alfetta gtv2000) or does anyone know of anywhere that they can be had for a reasonable price.

Cheers